New Products

Wheat - crushed grain 500g (Weyermanns)
Wheat is a difficult grain to malt, as it has no husk to protect the delicate acrospire. It has, however, many beneficial properties for the brewer... more info
€1.35
Sale â‚¬1.21
Save: 10%
Crystal - crushed grain 500g 145 EBC
This classic body builder is unsurpassed in Bitter beers for adding subtle sweetness to balance the customary high hop rate. Crystal malt is produced... more info
€1.25
Sale â‚¬1.13
Save: 10%
Caramunich Type III - CRUSHED Malt 500g (Weyermanns 140-160 EBC)
A very special and rare malt only produced in Bamberg in northern Bavaria. It is made in a similar way to Munich Malt except that caramelisation is... more info
€1.25
Sale â‚¬1.13
Save: 10%
Carapils - crushed grain 500g (Weyermanns)
<span lang="EN-GB" style="FONT-SIZE: 12pt; FONT-FAMILY: " times="" new="" roman";=""... more info
€1.25
Sale â‚¬1.13
Save: 10%
Stainless Steel Pin Valve C/W Red Plastic Bulb Holder
Out Of Stock
A replacement bulb holder for the microbrewery and S30 steel pin valve. more info
€14.95
Spare Plastic Bulb Holder
A replacement bulb holder for the microbrewery. Colour may vary more info
€4.00
Beer Float For King Keg Barrels
This cap will fit both the King Keg Bottom and Top Tap Barrels. Comes with O Ring and inlet/pressure relief valve. more info
€12.95
King Keg 4" S30 RB Cap + 'O' Ring
Out Of Stock
This cap will fit both the King Keg Bottom and Top Tap Barrels. Comes with O Ring and inlet/pressure relief valve. more info
€19.95
Bubbler Airlock Plastic with Cap
The old style, strong bubble shaped airlock. more info
€0.85
Rubber Bungs Solid
These rubber bungs are standard size to fit 1 gallon vessels and 5 gallon wine fermenters.   Dimensions: 25/31mm & 30mm long more info
€1.25
Rubber Bungs Bored
These rubber bungs are standard size to fit 1 gallon vessels and 5 gallon wine fermenters.   Dimensions: 25/31mm & 30mm long more info
€1.50
Thermometer 12" (Spirit)
12" glass spirit thermometer graduated from -20°C to +110°C. more info
€3.50
Trial Jar Plastic
Out Of Stock
Graduated trial jar for use with your hydrometer. more info
€6.50
Hydrometer
The beer and wine maker's best friend. Use your hydrometer at the beginning, during and at the end of fermentation, to tell you the specific... more info
€4.00
Tap Washer
Provides an air tight seal to your Quick Serve or Drum Tap. more info
€0.75
Back Nut,Plastic (3/4" BSP)
Replacement back nut for both the quick serve and drum taps. more info
€1.00
Simple Syphon
This syphon tube is made from food grade PVC. There is a small tap attached to one and and a rigid tube attached to the other. This tube has a... more info
€5.50
Medium Auto Syphon 23lt 44cm
Out Of Stock
In crystal-clear plexiglas. Puts an end to unhygienic blowing or sucking on the siphon : simply pull and the siphon is working ! With removable... more info
€12.95
Syphon Clip - For Simple Syphon
***Not suitable for Auto Syphons***   Attaches to the top of your fermenting bin and holds your syphon tube firmly in place during beer... more info
€2.00
Muslin Hop/ Grain Bags (Single)
Perfect for Dry Hopping your beer.   Dimensions   Width 13.50 cm   Height 5.20 cm   Length 15.00 cm   more info
€0.75
Beer Paddle Plastic
A flat sided paddle with holes, made for stirring wort. The holes greatly aid the mixing of malt extract with water and sugar. more info
€2.50
33 Litre Fermentation Vessel, fitted with Tap
Vessel volume when full - 35litres. Vessel Graduated to 28 litres.   These buckets are made of food quality, opague plastic and are graded on... more info
€16.95
33 Litre Fermentation Vessel With Airlock & Bung
Vessel volume when full - 35litres. Vessel Graduated to 28 litres.   This bucket is made of food quality, opague plastic and is graded on... more info
€15.95
Polythene Tubing Clear 3/8" I.d. (10 x 13mm) - per metre
Metric: 10mm ID x 13mm OD more info
€2.50
Beer/Gas Line 3/16" o.d. - per metre (Hard)
Connects gas supply to Cornelius Keg. more info
€1.60
Beer/Gas Line 5/16" o.d. (5.4 x 8mm) - per metre (Hard)
Connects gas supply to Cornelius Keg. Metric: 5mm ID x 8mm OD more info
€1.60
Beer/Gas Line 3/8" o.d. (6.7 x 9.5mm) - per metre (Hard)
Connects gas supply to Cornelius Keg. Metric: 6.7mm ID x 9.5mm OD more info
€1.60
O Ring Lid Dip Tube
€1.00
O Ring Lid
Fits the Cornelius Keg lid providing an airtight seal. more info
€1.25
O Ring Valve
€1.00