1/2" NPS Stainless Steel Locknut Straight threaded with groove for o-ring. Fits the 1/2" Fitting sets.  Will seat fully down any... more info

These 1/8" thick flat gaskets custom cut and we use them for all bulkheads and make-weldless kits for 1/2" NPT threaded components. These are much... more info

more info

more info

Allows you to connect 3/8" or 1/2" ID tubing to the ball valve. more info

Stainless Steel Construction 3 Piece Design Insulated Handle 1/2" Female NPT Threads more info

1/2" NPS Stainless Steel FLANGE style Locknut . Straight threaded with flat flange, used with flat style gaskets. more info

more info

Full port stainless steel ball valves and a lock out handle. more info

These 1/8" thick flat gaskets custom cut and we use them for all bulkheads and make-weldless kits for 3/4" NPT threaded components. These are much... more info

more info

more info

more info

more info

more info

Brass Ball Valve 1/2" MPT 1/2" female NPT threads on the outlet, 1/2" male NPT treads on the inlet. more info

Handy for tightening all that loose home brew tubing. more info

Handy for tightening all that loose home brew tubing. more info

A replacement set of silicone o-rings for the Cooler bulkhead. more info

Female QD/ 5/8" Hose Barb. The ID of the barb is a full flow 1/2" ID and 1/2" ID silicone tubing will stretch over the 5/8" barb... more info

This 304 stainless steel female quick disconnect easily attaches to a male QD and quickly seals. This QD features a 1/2" Male Pipe Thread on the... more info

more info

more info

Add a bulkhead to your kettle, fermentor or any thin walled container. This bulkhead fitting has all of the seals and lock nuts you will need, with... more info

Handy for tightening all that loose home brew tubing. more info

A replacement set of silicone o-rings for the kettle bulkhead fitting. more info

These male quick disconnect couple with the stainless female quick disconnects. more info

This stainless steel male quick-disconnect (QD) has a 1/2" female NPT fitting on the end for easy integration into a ball valve with a male NPT... more info

Made from 304 stainless steel, this is a quick disconnect that seals up very well without a lot of work in connceting them. These feature a 5/8"... more info

The Bulkhead Fitting is a stainless steel bulkhead connector used for cooler conversions. The total length is 2 1/2". This bulkhead is for premium... more info

These male quick disconnect couple with the stainless female quick disconnects. more info

more info

more info

more info

more info

more info

more info

Use this 2 inch all thread nipple to add a valve to a kettle or mash tun or to add bulkhead to anything you like. With the all thread nipple at 2.5... more info

Stainless Steel 1/2" FPT To 1/2" barb can be attached to any 1/2" MPT. more info

more info

more info

more info

Full coupler with ½ inch female pipe thread. Full couplers have threads for insertion from both sides. more info

Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 1/2" Compression This is a custom made weldless compression bulkhead that can be used to... more info

more info

For attaching ball valves, thermometers, etc to kettles with a 7/8" hole, the Weldless Bulkhead fitting proves easier to tighten with wrench(es)... more info

This Stainless Cooler Conversion Kit is larger to accommodate coolers with thicker sidewalls. more info

These stainless steel carbonation caps are intended to convert 1L and 2L bottles to pressurised growlers.  Fill up a 1L or 2L PET bottle with... more info

Carbonation cap for PET bottles. Stainless steel design. No plastic parts. Works for standard PET bottles. Perfect for taking some beer on the road... more info

more info

The Bulkhead Fitting is a stainless steel bulkhead connector used for cooler conversions. more info

Your custom made tap handle will be the talk of the party!   You can create your own tap handle and mount it with this threaded insert. Simply... more info

Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 3/8" Compression This is a custom made weldless compression bulkhead that can be used to install a... more info

Stainless Steel HERMS Bulkhead - 1/2" Male NPT x 3/8" Compression This is a custom made weldless compression bulkhead that can be used to install a... more info

This is a product that many professional breweries use in their pilot systems. It is easy to use and easy to clean. Needs an additional source of... more info

Bulkhead fitting for kettles. Can be used for connecting your ball valve tap and your bazooka screen when constructing your homebrew kettle. more info

Made from 304 stainless steel, this is a quick disconnect that seals up very well without a lot of work in connceting them. These feature a 1/2"... more info

Made from 304 stainless steel, this is a quick disconnect that seals up very well without a lot of work in connceting them. These feature a 3/8"... more info

304 Stainless Steel Nipple 1/2" X 1/2" NPT (1" in length). Used to combine two fittings with 1/2" FPT threads. more info

304 Stainless Steel Nipple 1/2" X 1/2" NPT (1.5" in length). Used to combine two fittings with 1/2" FPT threads. more info

304 Stainless Steel Nipple 1/2" X 1/2" NPT (2" in length). Used to combine two fittings with 1/2" FPT threads. more info

more info

Stainless sight gauge adapter with plug. It has a 1/2" MPT and 1/8" FPT to screw the sight gauge into. more info

This design is for installing a 1/4" temperature sensor through a vessel wall without welding! Single-piece design prevents the leakage and cleaning... more info

more info

Made from Stainless Steel, designed for tighter spaces on brew pots and kettles. Used in many applications and threads in any half inch part. Go... more info

Variable length bulkhead - This bulkhead is designed to accommodate all wall thicknesses of UP TO 1.5". The threaded nipple is straight thread... more info

Used in attaching fittings such as ball valves and bazooka screens to your kettle.   The product total length is 2” and it uses a 3/4”... more info

Please note: These sight gauges do not include o-rings, washers or back nuts. With this sight gauge you can now monitor the liquid level visually... more info

Please note: These sight gauges do not include o-rings, washers or back nuts. With this sight gauge you can now monitor the liquid level visually... more info